dust suppression system
Dust suppression without compromises on small and medium-sized construction sites
The range of Ciclone’s electronic fog cannons for dust suppression offers suitable alternatives for every need. The CE303 offers the possibility to adopt effective solutions without being forced to invest in oversized equipment, with proportional management and maintenance costs.
The CE303 retains all the characteristics of Ciclone's dust suppression systems, but does so through a project optimized for small or medium sized sites and works.
Thanks to a solid, resistant and reliable steel structure, it can operate in any condition, also thanks to the monoblock die-cast aluminium crown which can be heated. From the operative point of view, great advantages derive from the possibility to use an articulated hydraulic arm able to reach even the most difficult points. Finally, the turbine with lift and rotation by means of electronic PLC, separated from the machine body, allows to manage the fog cannon easily, also thanks to the possibility to place the turbine on high positions separating it from the controls present on the machine body.
Moreover, one of the reasons why the Ciclone’s dust suppression systems are so popular is the presence of housings for forklift forks and eyebolts that allow the machine to be lifted either by forklift, telescopic arm or by means of belts or chains.
Request the complete data sheet
Electronic dust suppression system
On fixed base
The CE303 is a fog cannon available in the version with a fixed base, for those who do not have special needs in terms of mobility. The machine, like the others in the line, is appreciated for its high performance and particularly low running costs.
The three-wheel trolley configuration is designed to promote transportability and manoeuvrability also thanks to the third guide wheel and to the drawbar with French-type eye for towing on site with the means of work.
The version with hydraulic articulated arm extendable up to six meters(19,6 ft) is the solution for those who never want to be found unprepared. It is unique on the market and it allows dust suppression in areas where no other machine can reach.
The CE303 is a machine that has a flow rate that ranges from 20 to 30 liters (5,2-7,9 gal) per minute with a 10bar pressure pump, while with a high pressure pump the consumption is between 10 and 18 liters (2,6-4,7 gal) per minute. Moreover, among the great advantages that distinguish the CE303 there is the possibility to use it with any type of water, thanks to a design that includes a filter of the latest generation with high performance.
The dust suppression systems have a high efficiency able to optimize the necessary resources. The high performances are guaranteed by a power of 7,5kw for a model without articulated arm. It reaches 8,5 in the other case. Numbers that require the use of a generator with at least the above mentioned powers.
Flexibility and versatility. These are two words that distinguish the fog cannons of Ciclone S.r.l., an exclusive solution such as the hydraulic arm is designed to maximize the two concepts. With a length of six meters (19,6 ft) it can arrive almost anywhere, but whoever uses it has the possibility to position it at will. The turbine itself benefits from the ability to rotate 340 degrees and a tilting that ranges from -20 degrees to +45.
Ciclone’s dust suppression systems have particularly advanced supports. The Dosatron pump makes it possible to manage the additives in the best possible way, avoiding having to insert them directly into the tank. Its role is to allow the additives to be inserted at a later time and then to provide for mixing. This allows not to waste water and to mix only what is needed.
To have the machine running, only when needed. This is what the anemometer installed on Ciclone dust suppression systems automatically does. The anemometer takes care of sensing the wind speed, turning the engine on if necessary and turning it off if not. This ensures a saving of water when there is an interruption of action in circumstances where it is not necessary.
The radio control is an optional extra available to those who need a fog cannon to be controlled remotely. It is a technological solution based on a 12 channel Telecrane remote control and an industrial wireless control receiver. The battery charger is included.
The fog cannons for dust suppression are conceived by Ciclone S.r.l. with the idea of having no limits of use. The project, the materials and some particular technical choices allow to exploit them in any context and condition. At the moment they are used in:
- Industrial and civil demolition.
- Heavy industry production processes.
- Mining and quarrying as well as underground tunneling.
- Crushing and recycling of inert materials and treatment or storage of metallic materials.
- Remediation of polluted land and areas.
- Unloading of material from ships.
- Coal storage.
- Recycling and waste storage management.
- Odor suppression from rotting product processes or plant digestate production.
- Wood shredding and processing.
- Cooling of event areas.